Low Fire Hazard Heat Shrink Marker Sleeve 2:1
Low Fire Hazard Heat Shrink Marker Sleeve 2:1 – Ideal for applications where limited fire hazard characteristics are necessary.
A = ID Before Shrink [mm]
B = Flat Width Before Shrink [mm]
C = Double Wall Thickness Before Dhrink [mm]
D = ID After Shrink [mm]
E = Single Wall Thickness After Shrink [mm]
Note: Special sizes or colors available on request.
| Material | Radiation Cross-linked Heat Shrinkable Polyolefin |
|---|---|
| Fire Performance | Halogen Free Low Smoke and Low Toxic Fumes |
| Operating Temperature | -55°C to +125°C |
| Minimum Shrink Temperature | 70°C |
| Min Full Recovery Temp | 120°C |
| Ratio | 2:01 |
| Supplied | Ladder format or Continuous Length |
| Printable | Thermal Transfer |
| Printable Sides | Single or Double Sided |
| Colours | White, Yellow |
TTS is a leader in the manufacture and supply of the electrical accessories for commercial, mining and industrial sectors, as well as maintenance and repair markets.
Select at least 2 products
to compare
